Hooptie and SnackBar Configurations

The Hooptie and SnackBar hand rail system offers a wide variety of configurations to fit the needs of your rear passengers. Below are the most common configurations and the parts needed to build them on your ride.

Please note: The current Hooptie and SnackBars with brackets are only compatible with 2021 and beyond Xtracycle models. 

Two Hooptie rails 

Best for young passengers who might need additional help in staying contained on the rear deck. This configuration is compatible with rear child seats that clamp to the rear deck, like the Yepp Nexxt seats. The Hooptie rails will just need to be set to the wide setting. 

Requires:
Longtail Hooptie (for eSwoop or eStoker) or RFA Hooptie.  

One Hooptie rail, one set of SnackBars

Best for children who are able to get on and off the bike on their own. This configuration is compatible with rear child seats that clamp to the rear deck, like the

Requires:
Longtail HalfHooptie or RFA HalfHooptie.

For those who already have a complete Hooptie and want to swap one of the bars for SnackBars, you will just need to replace one of the bars with a set of SnackBars without brackets

Two sets of SnackBars

Best for older children or adult passengers.

Requires: Two sets of
SnackBars with brackets.

For those who already have a complete Hooptie and want to swap out both bars for SnackBars, you will just need to replace the bars with two sets of
SnackBars without brackets

One set of SnackBars

Best for one older child or adult passenger. Not recommended for more than one rear passenger.

Requires: Two sets of
SnackBars with brackets.