H-Rack Locations

From Open Source LongTail Technology

The H-rack is an accessory that fits in the side of the FreeRadical, providing a flat platform for loading bulky objects.

The H-rack ports (AKA Front and Rear Bridges) are simple cross-tubes of the same material as the V-rack ports. Holes for the detent pins are required. The Free Radical incorporates an angled cut on the ends of the front tube, but this is not necessary. There is however a maximum length of the tube that should not be exceeded, or some accessories such as the KickBack will not fit. Please note that the center-center dimensions are different than those of the V-racks.

Tubing size for the V-rack and H-rack ports is 25.4mm OD with a 1mm wall thickness