Hooptie Retrofit Kit
If you have a pre-2016 Xtracycle EdgeRunner, or FreeRadical / Cargo Joe / Radish / Surly Big Dummy with a plastic FlightDeck, you will need this retrofit kit to properly install the LT2 Hooptie. The LT1 Hooptie (no longer in production or available for sale) does not require this retrofit kit. Older FlightDecks with decks thicker than .5" will require the addition of longer bolts (not included).
If your bike has a wooden SnapDeck or the metal Surly Big Dummy, you will first need to replace that deck before installing a Hooptie. Items required are an LT1 version 2 FlightDeck and Superhooks (1 set if not also installing a child seat, 2 sets in installing a child seat). Not sure what type of deck your bike has and if you need to replace it or not before installing a Hooptie? Check out the FlightDeck Identification Guide to verify.
Do not use the retrofit kit with wooden decks or on non-Xtracycle decks.
|Materials||Plastic, steel bolts, nuts, and washers.|
|Compatibility||Bieks that have a LT1 version 2 Flight deck|
|Not compatible with:||wooden SnapDeck, LT2 FlightDeck, metal Surly Big Dummy deck|
Returns must be approved prior to return shipment by emailing email@example.com. Items must be in new, unopened condition (unless the return is an approved warranty claim - see “Warranty”) and mailed through a traceable mailing service. Returns received in damaged packaging will not be refunded and will not be mailed back to the customer. If the packaging has been opened or altered in anyway (i.e. cut open and taped closed again), the packaging will be considered damaged and the item will not be refunded and will not be mailed back to the customer. Returns due to mis-shipment and return shipping due to mis-ordering will be at the customer’s expense. There are no returns or exchanges on sale items or complete bikes.
The Hooptie retrofit kit is guaranteed to be free from manufacturing defects for one (1) year from the original date of purchase. Defective products will be repaired or replaced at Xtracycle's discretion. To determine if a warranty claim is valid you may be required to return the product to Xtracycle for inspection. Xtracycle is not responsible for removal, installation or shipping costs. This warranty applies only to the original buyer and is not transferable. This warranty does not cover damage from use of this product outside of its intended range or that resulting from modification or neglect. It also does not cover wear and tear resulting from the normal use of the product. If think you have a warranty issue, please email us to start the warranty process.