Loading... Please wait...

FlightDeck - LT1 version 2 (no SuperHooks)

$75.00
SKU:
2FD3000
Quantity:

Product Description

FlightDeck - LT1 version 2

The LT1 v.2 FlightDeck is a super sturdy, waterproof, UV proof, scratch and ding resistant plastic deck that sits atop the V-racks and provides a surface for carrying cargo or passengers. It is made from 100% post-consumer high density polyethylene (HDPE), which reduces our ecological impact and keeps perfectly good plastic out of the waste stream. This deck requires a set of SuperHooks (sold separately) to attach the LT1 v.2 FlightDeck to your V-racks, ensuring a secure connection. Add a MagicCarpet (full or mini) for a padded cushion to increase rear passenger's comfort. If you will be installing a Yepp Maxi seat on the deck, use two sets of SuperHooks for a total of 8 hooks. Do not use SnapHooks with this deck. The LT1 v.2 FlightDeck does NOT require Yepp adapters as the Yepp seat secures to a hole that must be cut into the deck. This above picture shows the deck with these rectangular holes cut out but the deck arrives as a solid deck, with no pre-cut holes. 

If you intend to install an LT2 Hooptie on a bike with a wooden SnapDeck or metal deck - like those found on the Pre-2016 EdgeRunner, FreeRadical, Cargo Joe, Radish, or Surly Big Dummy - this deck with the appropriate number of SuperHooks and Hooptie Retrofit Kit is required. 

This deck is NOT compatible with 2016 EdgeRunners, Leaps, Cargo Nodes, Yuba cargo bikes, Kona cargo bikes, or the Trek Transport. 

Not sure if this is the deck your bike has? Check out the FlightDeck Identification Guide to verify.  

Tech Specs

Materials 100% post-consumer HDPE, aluminum hooks and stainless steel hardware.
Weight 3.5 lbs

Compatibility

Compatibility Pre-2016 EdgeRunner, FreeRadical, Cargo Joe, Radish, Surly Big Dummy
Not compatible with: 2016 EdgeRunner, Leap, Cargo Node, Yuba cargo bikes, Kona cargo bikes, Trek Transport

Instructions and Hole Templates

LT1 v.2 FlightDeck Instructions (383kb PDF): Download

Error in Step 3 of instruction manual suggests that there two options for install of forward hook positions. Correction should read - there are two options for install for rear hook placement. Narrow end of the deck should face toward the rear of the bike.

1st Generation Flight Deck Templates (PDF):  Letter Size | Full Size

Returns

Returns must be approved prior to return shipment by emailing support@xtracycle.com. Items must be in new, unopened condition (unless the return is an approved warranty claim - see “Warranty”) and mailed through a traceable mailing service. Returns received in damaged packaging will not be refunded and will not be mailed back to the customer. If the packaging has been opened or altered in anyway (i.e. cut open and taped closed again), the packaging will be considered damaged and the item will not be refunded and will not be mailed back to the customer. Returns due to mis-shipment and return shipping due to mis-ordering will be at the customer’s expense. There are no returns or exchanges on sale items or complete bikes. 

Warranty

The LT1 v.2 FlightDeck is guaranteed to be free from manufacturing defects for one (1) year from the original date of purchase. Defective products will be repaired or replaced at Xtracycle's discretion. To determine if a warranty claim is valid you may be required to return the product to Xtracycle for inspection. Xtracycle is not responsible for removal, installation or shipping costs. This warranty applies only to the original buyer and is not transferable. This warranty does not cover damage from use of this product outside of its intended range or that resulting from modification or neglect. It also does not cover wear and tear resulting from the normal use of the product. If think you have a warranty issue, please email us to start the warranty process. 

Find Similar Products by Category